Radix Epsilon 1 FTA User Manual - Using Your Receiver
Page 28
Version 1.0
Using Your Receiver
7.4
Listening to the Radio
In addition to television programmes, many broadcasters transmit their radio programmes in digital HIFI
format.
• Press the RADIO key (see Section 4.1) to toggle between TV and Radio mode.
NOTE:
You can only toggle between television and radio modes when a complete list has been called up.
The complete list of preset channels consists of a television section (known as “Video”) and a radio
section.
• Use the > button to call up the complete video list.
• To switch to the complete radio list, press the radio button and select a broadcaster
Confirm your choice.
• Press the Radio key to switch from Radio to TV mode.
7.5
Selecting the Audio Mode (incl. Digital)
• Press the AUDIO button. Using the UP/DOWN buttons, select one of the languages (BL) provided by
the broadcaster or select “AC-3”.
If you selected “AC-3”, the receiver will transmit a Dolby Digital signals through the digital output.
Provided you have connected a suitable device, for example, a HiFi amplifier, you can use this im-
proved sound quality.
• Press the > button and select one of the following options:
Stereo (L+R) – sound from right and left
Mono1 (L+L) – sound from left only
Mono1 (L+L) – sound from right only
Swap (R+L) – sound from right and left swapped