Radix Epsilon 1 FTA User Manual - Programming Your Receiver
Version 1.0
Page 33
GB
9.3.1
Automatic Search
During automatic search, certain data is already
pre-programmed. Standard satellite systems use
Universal-LNBs with a local oscillator frequency of
9750 MHz for the lower band and 10600 MHz for the
lower band. The basic setting for this receiver con-
tains this data except the ASTRA and HOTBIRD
satellites. You should only change these settings if
your satellite system deviates from this or if you
specifically want different settings.
While the receiver is searching, an hourglass and a
progress bar appear on which you can follow the
frequency search. In addition, the following informa-
tion is also displayed:
DF: - Satellite frequency
SR: - Symbol rate
.../... - Number of transponders found / possible
New: - Number of stored programmes
If the search fails, check and correct all settings.
9.3.2
Manual Search
(This menu is presented in two sections which are
accessed using the Continue and BACK buttons)
These settings should only be changed by qualified
personnel or very advanced users.
Network Search:
Each transponder offers information for the complete
satellite system (Requirement: The provider must
keep the list as up-to-date as possible). When you
enter a transponder and activate the network search,
the receiver automatically searches all transponders
which belong to the network. The definition of the
network varies according to different satellite opera-
tors with the result that all channels on a satellite or
only some are examined.
PID (Packed Identifier):
due to inadequate labelling, many programs may not be recognised during either automatic or manual
searches. In such cases, you can enter the PID numbers to receive these programs.
Press [EXIT] to abort Auto Search.
Auto Search
1. Satellite 1
2. LNB Local Frequency
3. DiSEqC
4. 22 kHz
5. Satellite 2
6. LNB Local Frequency
7. DiSEqC
8. 22 kHz
9. Start Search
Exit
Menu
Back
Exit
TV
Main menu
Go Back
DF: 12226
SR: 27.500
58/79
New:0
HOTBIRD
Manual Search
TV
Exit
Menu
Back
1. Satellite 1
2. LNB Local Frequency
3. DiSEqC
4. 22 kHz
5. LNB Polarity
6. Next
ASTRA
Universal
A
AUTO
Horizontal
Choose the setting you wish to change [UP/DN].
Change the setting by toggling with [LT/RT].
Main menu
Go Back
1. Down Frequency
2. Symbol Rate
3. Network Search
4. Start Search
5. Video PID
6. Audio PID
7. PCR PID
11837
27.500
OFF
AUTO
AUTO
AUTO