Rainforest EAGLE User Manual - Eagle
EAGLE
™
User Manual
13
Understanding the Information Label
The information Label is located on the underside of your EAGLE
™. It contains
important information that you will need to operate your device.
ZigBee Area
– This area at the top of the label has two fields:
o MAC: the (802.15.4 ZigBee MACID.
o IN: the Install code for the device.
Both of these numbers are unique to your device, and must be provided to your
utility so that they can load them into your meter. Only when the meter is loaded
with these numbers can it communicate with your EAGLE
™.
Ethernet Area
– This area in the middle of the label has two fields:
o Local: the local URL, or Local Web Address of your EAGLE
™, which is
used to find it on your Local Area Network (LAN) using your web browser.
o CloudID: the last 6 digits of the Ethernet MAC address of the device,
which is used when registering the device with a Cloud Service.
Both of these numbers uniquely identify your device on the Internet Protocol (IP)
network.
Install Code
MAC Address
Local Web
Address
Cloud ID
ZigBee
Area
Ethernet
Area