Rainforest EAGLE User Manual - Eagle
EAGLE
™
User Manual
15
CONFIG CLOUD
– Goes to the “Cloud Configuration” page that lets you set up a
connection to stream your meter data to a Cloud Service. See the Connecting
to a Cloud Service section of this manual.
ADVANCED SETUP
– Takes you to the “Advanced Configuration” page that lets
you set network configuration options. Note that many of these options can
adversely affect the operation of your device
– use with caution! You will see a
warning before entering this page.
Your EAGLE
™ comes preconfigured to allow remote updates using Secure Shell
(SSH) and Virtual Private Network (VPN). If you prefer not to allow external
connections (including the Rainforest update server) to your device, you can
disable VPN connections. Likewise, you can prevent anyone (including yourself)
from logging into your device by disabling the SSH interface.
The
“Advanced Configuration” page also has three Function Buttons down the
right side:
o RESTART ZIGBEE LINK
– Reboots just the ZigBee radio, without
losing the connection to the smart meter.
o DISCONNECT FROM METER
– Resets the ZigBee radio link to the
smart meter, and terminates the connection. The meter will not talk to
the EAGLE
™ until it is re-provisioned, as described in Step 2 of the
Quick Setup section of this manual. This function can also be used to
move the EAGLE
™ to a different meter.
o FACTORY RESET
– Reboots the EAGLE™, which terminates the
meter connection, clears all of the history data, and sets all options to
original factory settings.