RAMSET RL510 Instruction Manual - How to Use The Rl510 Laser
How to Use the RL510 Laser
10
2.5 Rotation
The head rotates at 6 speeds: 0, 90, 150, 300, 450, and 600 rpm. 600 rpm is
the default setting The laser beam is more visible at slower rotation speeds.
If the laser head is rotating clockwise, press
key (16) to decrease speed or press key (15)
to stop rotation; if the laser head is rotating
counterclockwise, press key (15) to decrease
speed or press key (16) to stop rotation.
When the beam has stopped rotating, the point can be moved to the right
or left using keys (13) and (14). You can also move the head manually to
position the beam point. To start rotation again in the clockwise direction,
press key (16). To start rotation again in the counterclockwise direction,
press key (15).
2.6 Using the Laser Chalk Line
Ideal for short distance applications, the chalk
line feature gives a precise and stable laser line
for working directly on your reference plane.
To use the laser line, stop the rotation and flip up the collar located on
the side of the rotating head (5). This collar switches between point and
line modes.
You can move the stationary chalk line left by pressing key (13), and
right by pressing key (14). You can also move the head manually or use
the remote control.
If the laser is in chalk line mode, the detector will not work.
Switch to rotating point mode to detect the beam.
2.7 Scanning
For interior applications, scanning mode allows you to see the beam
easier at a distance.
If the laser is in chalk line mode, switch to beam point mode
before scanning.
1.
To scan, simultaneously press keys (13) and (15) on the laser keypad
or press the scanning symbol on the remote control.
X
Y
Z
14
16
13
15
5