RAMSET RL510 Instruction Manual - General Information
General Information
4
CLASS 3R LASER PRODUCT
WAVE LENGTH 630-680 nM
MAX. OUTPUT POWER 5mW
LASER LIGHT: AVOID DIRECT EYE EXPOSURE.
CONFORMS TO IEC 60825-1:2001
COMPLIES WITH 21 CFR 1040.10 AND 1040.11
EXCEPT FOR DEVIATIONS PURSUANT TO
LASER NOTICE No. 50 DATED JULY 26, 2001
Ramset, 700 High Grove Boulevard
Glendale Heights, IL 60139 USA
ODA
Although the RL510 is very simple to use, we recommend that you read
this manual before operating the laser.
1. GENERAL INFORMATION
1.1 Description
The RL510 is an automatic visible laser that can be used for leveling,
vertical alignment, plumbing and squaring. Applications include
installing suspended ceilings, technical floorings, partitions, and a
variety of outdoor alignment tasks.
The RL510 laser has these advanced features:
•
Automatic self-leveling in both horizontal and vertical modes
•
Motorized mount speeds setup for ceilings and partitions
•
Manual leveling in X and Y axes for dual slope setting (± 10%)
•
Semi-automatic single axis slope setting (automatic leveling in
X and manual leveling in Y)
•
Ability to match slope for inclined planes greater than 10%
•
Choice of beams, including scanning and chalk line
•
Square shot that’s left and right adjustable
•
Easy electronic calibration
1.2 Safety
The RL510 is a Class 3R laser, manufactured to comply with the
international rules of safety IEC 60825-1, 2001. Although the power of
the emission of the beam is less than 5mW in Class 3R, the following
cautions are recommended:
•
Do not stare directly at the beam
•
Do not set up the laser at eye level
A. CDRH warning label for USA