Rapiscan TSA TPM-903B Operation And Service Manual - page 17

TSA TPM903 Operations and Service Manual 

Doc: # 5058 Rev. A 

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________ 

This document is the exclusive property of Rapiscan Systems. 

Unauthorized use or distribution is strictly prohibited 

11 

3.4.2.4. F-ALARM TEST: 

Displays the number of alarm comparisons that have been made and the number of alarms that 

were detected. These values are cleared when the system is turned off. The primary use for this 

feature is to test the number of nuisance alarms in a controlled environment. 

3.4.2.5 SYSTEM ID: 

Assigns an identification number to the system. This number is used to uniquely identify the 

system to a PC. This number must be used by the PC to establish a communications link. This 

range of this number is 1 - 32,767. This number is set to 1 when the system is shipped.