Raritan Dominion KX III Quick Setup Manual - page 5
Dominion KX III User Station QSG
5
QSG-KX3UST-0C-v1.0.1-E 255-62-0010-00 RoHS
Button
Function
Connection Properties:
This button manages streaming video
performance over your connection to the target
server. The settings are stored persistently for
the accessed KVM port.
In addition, this button can show information
like FPS and video resolution.
The factory default settings are ideal for most
connections so it is not recommended to
change the settings unless required.
Keyboard:
This button shows a list of available hot key
macros and sends the selected macro to the
target server.
Mouse:
This button switches between single mouse
and various dual mouse modes, or
synchronizes two mouse pointers onscreen.
Video Settings:
This button adjusts video sensing and color
calibration settings.
Connect Audio and Mass Storage Devices:
This button connects or disconnects a virtual
media drive from the target server, if the target
supports virtual media.
For example, you can mount a CD-ROM or
USB flash drive onto the target server.
In addition, you can configure the audio
connection to the target server.
Power Control:
This button turns on, off or power cycles the
target server, if a Raritan PDU is connected to
the same KVM switch.
View:
This button shows several display options,
such as Scale Video and Full-Screen Mode.
The right group comprises the following shortcut buttons for
frequently-used functions.
Button
Function
Synchronize Mouse:
This button forces the target server's mouse
pointer to align with the User Station's in the
dual mouse modes.
Button
Function
Auto-sense Video:
This button forces the video re-sensing to
adjust the video display.
Send Ctrl+Alt+Del:
This button sends the hot key Ctrl+Alt+Del to
the target server to ensure it is interpreted by
that server.
Full-Screen Mode:
This button displays the target server's video in
full screen.
Press Ctrl+Alt+F to quit the Full-Screen mode.
Fit window to Target:
This button resizes the KVM Client window to
the target server's desktop video.
For detailed information on the toolbar buttons, see the online
help or user guide.
QS Rule
Basic Network Settings
The User Station's default network configuration is set to
Automatic (DHCP) for both IPv4 and IPv6 settings.
This section describes basic network configuration only. Refer
to the online help or user guide for more information.
To configure basic network settings:
1. Choose Main Menu > System Settings > Network
Connections.
2. In the Network Connections dialog, two default network
connections are available for the two LAN ports. enp2s0 is
for the LAN port near the power jack, and enp3s0 is for the
other.