Rauch K 51 Instruction Manual - page 24
of
64
Technical data
4
18
4.2
Description of the machine
Use the machine in accordance with chapter
The machine consists of the following assemblies:
Hopper with agitator fingers and outlet
Frame
Drive elements
Metering elements (agitator, metering slide, scale for the spreading volume)
Elements for adjusting the spreading width
Safety equipment; see
“Safety equipment at the machine“ on page 13
4.2.1
Assembly overview, rear
Figure 4.1:
Assembly overview - Rear
[1]
Hopper
[2]
Spreading width setting device
[3]
Rotors
[4]
Transmission
[5]
Spreading disc
[6]
Spreading width limiter plates
1
2
3
5
6
4