Rauch K 51 Instruction Manual - page 37
of
64
Machine settings
31
7
7.3
Adjusting the spreading vanes (towed operation)
7.3.1
Increasing the spreading density on the right-hand side in the direction of travel
1. Observe the rotational direction of the spreading disc.
Figure 7.3:
Rotational direction of the spreading disc
2. Disassemble the screws of the spreading vanes including the corresponding
nuts and washers.
Figure 7.4:
Spreading density on the right-hand side in the direction of travel
White arrow: Rotational direction of the spreading disc
Grey arrow: Adjustment of the spreading vanes against the rotational direction of the
spreading disc
NOTICE
Throw away the self-locking nut after loosening it and replace it by a new one.
See