Raymarine e7 Mounting And Getting Started - page 21
Item Device
Cable
color
Port
Input /
output
Posi-
tive (+)
/ nega-
tive (-)
7
*
*
Output
Positive
8
*
*
Output
Nega-
tive
9
*
*
Input
Positive
10
NMEA
device
*
*
Input
Nega-
tive
11
*
*
Output
Positive
12
NMEA
device
*
*
Output
Nega-
tive
Note:
*Refer to instructions provided with NMEA
device.
Powering the display on
1. Press and hold the
POWER
button until the
Raymarine logo appears.
2. Press
OK
to acknowledge the disclaimer message.
Powering the display off
1. Press and hold the
POWER
button until the
countdown reaches zero.
Note:
If the
POWER
button is released before the
countdown reaches zero, the power off is cancelled.
Adjusting the display brightness
1. Press the
POWER
button once.
The Backlight Level control is displayed.
2. Using the rotary control, adjust the brightness level
as appropriate.
3. To switch the color palette, from the homescreen
select
Customize→Display Preferences→Color
Palette
.
Simulator mode
The Simulator mode enables you to practice operating
your display without data from a GPS antenna, radar
scanner, AIS unit, or fishfinder.
The simulator mode is switched on / off in the
System
Setup Menu
.
Note:
Raymarine recommends that you do NOT
use the simulator mode whilst navigating.
Note:
The simulator will NOT display any real data,
including any safety messages (such as those
received from AIS units).
Note:
Any system settings made whilst in Simulator
mode are NOT transmitted to other equipment.
Enabling simulator mode
With the homescreen displayed:
1. Select
Set-Up
.
2. Select
System Settings
.
3. Select
Simulator
.
Homescreen overview
The homescreen provides a central point of access to
your display’s range of applications.
• The homescreen also provides quick access to your
data (waypoints, routes, and tracks).
• To access the homescreen, hold the
MENU
button
for 3 seconds. Alternatively, select the on-screen
Home
icon.
• The homescreen consists of a number of application
"pages", each represented by an icon. Applications
can be started by selecting the relevant page icon.
• Use the joystick or swipe the screen with your finger
to scroll the homescreen and access additional
application pages.
D12195-1
1
2
3
4
6
5
Screen item
Description
1
Touch Lock
— select this icon to lock the
touchscreen, preventing accidental use. To
unlock, use the UniControl to deselect the
Touch Lock icon (HybrifTouch displays only).
2
My Data
— this icon enables you to centrally
manage your lists of routes, tracks, and
waypoints.
3
Customize
— select this icon to configure
application pages and select the display’s
language, units, date/time, boat details and
display preferences.
4
Set-up
— select this icon to access the system
set-up menus.
5
Page
— each icon represents an application
page. A page can display up to 2 applications
simultaneously.
6
Status bar
— the status icons confirm the
status of externally-connected equipment,
including GPS, AIS, radar, and autopilot units.
21