Raymarine e7 Mounting And Getting Started - page 22
Pages
Pages are used to display applications.
Pages are displayed and accessed on the homescreen.
Each page can display up to 4 applications (depending
on multifunction display variant).
Note:
The e7 and e7D can only configure up to 2
applications per page. The e7/e7D can only display
4 applications per page if connected and to a e9/c9
or e12/c12 which has been configured to show 4
applications per page..
Any page on the homescreen can be customized,
enabling you to group your applications into different
pages, each designed for a specific purpose. For
example, you could have a page that includes the
chart and fishfinder applications, suitable for fishing,
and another page that includes the chart and data
applications, which would be suitable for general sailing.
You can add any application(s)
to any empty page.
Page featuring a single
application.
Page featuring multiple
applications.
You can also define a "layout" for each page, which
determines how the applications are arranged on the
screen.
Changing an existing page on the homescreen
With the homescreen displayed:
1. Select
Customize
.
2. Select
Homescreen
.
3. Select
Edit Page
.
4. Select the page icon that you want to change.
The Customize menu options are displayed.
5. Select the appropriate page layout (for example,
“Splitscreen”).
6. Select the application(s) you want to display on the
page, either by selecting the relevant menu item or
dragging it over to the displayed page.
7. Select
Finish
.
The Rename Page dialog is displayed.
8. Use the on-screen keyboard to name the page, then
select
Save
.
e7 / e7D Controls
D12179-1
2
4
5
6
7
3
1
1.
Touchscreen
— you can touch the screen to
operate many common functions, including all
menu operations (HybridTouch multifunction
displays only).
2.
Menu
— accesses menus. Press again to close
menus.
3.
UniControl
— provides a joystick and rotary control
and an OK button for using menus and applications.
4.
Back
— press to return to a previous menu or
dialog level.
5.
WPT / MOB
— press and release to access the
waypoint options. Press again to place a waypoint.
Press and hold to place a Man Overboard (MOB)
marker at your current position.
6.
Power
— press once to switch the unit ON. Once
powered on, press the Power button again to
adjust the brightness, access the power controls for
external devices, and access the autopilot controls.
Press and hold to switch the unit OFF.
7.
Chart card slots
— open the card door to insert
or remove MicroSD cards. There are 2 card slots
(labelled 1 and 2), used for electronic charts and
archiving waypoint, route and track data.
22
e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127