SAB Explorer User Manual - page 10
.
Receiver Connection
Various equipment (TV/VCR) can be connected to this receiver.
This manual will explain common ways to connect to the equipment.
If you are using a RF cable, please synchronize the RF channels of the
TV set and of the VCR.
If you experience any problem, please contact your sales agency.
1.
How to connect the receiver to a TV set
Connect one end of the SCART cable to the TV SCART socket on the back
of the receiver and the other end to the SCART input socket on your TV.
Connect the LNB[Dish] cable to the IF input connector of receiver.
If you want to use an RF cable, connect one end of a RF cable to the TV
OUT connector on the receiver and the other end to the RF IN connector
on your TV.
Connect your TV Arial cable to the ANT IN connector on the receiver for
receiving terrestrial or cable channels
2. How to connect the TV and VCR
Connect one SCART cable between the TV and the TV SCART socket on
the receiver.
Connect the other SCART cable between the VCR and the VIDEO SCART
socket on the receiver.
Connect one end of an RF cable to the TV OUT connector on the receiver
and the other end to the RF IN connector on your VCR.
Connect one end of a RF lead to the RF OUT connector on your VCR and
the other end to the RF IN connector on your TV.
Connect your TV antenna to the ANT IN connector on the receiver for
receiving terrestrial or cable channels.
Connect IF input connector of the receiver and antenna.
3. How to connect the Audio system
Connect the AUDIO R, L terminal
of the receiver and the LINE, AUX,
SPARE or EXTRA input socket
using the RCA/Cinch stereo cable.
- 9 -