SAB Explorer User Manual - page 17
When selecting “USALS” Yellow Color button
If you have a USALS motorized system, you must set
your position (latitude and longitude) in order to
calculate all motor positions for viewable satellites.
You should refer to the motor’s manual to
get information for installing a USALS motorized
system.
1) Longitude & Latitude : Input the value
of latitude and longitude in which the dish-
installer is placed, press “NUMERIC”
button.
2) Current Satellite : Indicate the current
satellite name.
3) Rotate : To move the motor to the stored
position, press “OK” button.
4) Limit : You can set the maximum move
extent. You can control “Enable” or
“Disable” mode.
When you select “Enable”, “East limit”
and “West Limit” will be activated.
Press the “OK” key, then current position
will be restored as each limit.
5) Go to Reference : To clear the east &
west limit, press “OK” button.
Committed : Set the port number of
DiSEqC 1.0 switch.
Uncommitted : Set the port number of
DiSEqC 1.1 switch.
Save : After Setup complete, Press
“RED” Button to Save.
Main Menu
- 16 -