SAB Explorer User Manual - page 4
This receiver has been manufactured to satisfy the international safety standards.
Please read the following safety precautions carefully.
MAIN SUPPLY
110-240V, 50/60Hz, 30W
OVERLOADING
Do not overload a wall outlet, extension cord or adapter as this may result in
fire or electric shock.
LIQUIDS
: This receiver shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the receiver.
CLEANING
: Disconnect the receiver from the main supply before cleaning. Do not use any
kind of solvents to clean the receiver, only use a soft-dry cloth.
VENTILATION
: The slots on top of the receiver must be left uncovered to allow proper airflow
to the unit.
Do not stand the receiver on soft furnishings or carpets.
Do not expose the receiver to direct sunlight or do not place it near a heater.
Do not stack electronic equipments on top of the receiver.
ATTACHMENTS
: Do not use any unrecommended attachments as these may cause hazard or
damage the receiver.
CONNECTION TO THE SATTLITE DISH LNB
: Disconnect the receiver from the main supply before connecting or
disconnecting the cable from the satellite dish.
FAILURE TO DO SO CAN DAMAGE THE LNB.
CONNECTION TO THE TV.
Disconnect the receiver from the main supply before connecting or
disconnecting the cable from TV.
FAILURE TO DO SO CAN DAMAGE THE TV.
EARTHING
The LNB cable MUST BE EARTHED to the system earth for the satellite dish.
LOCATION
: Place the receiver indoor in order not to expose to lightening, rain or sunlight.
Safety
Safety
- 3 -