SAB Explorer User Manual - page 19
1.1.4 TRANSPONDER
It will be more convenient to use this
procedure when you want to search the
channels for a specified transponder offered
from the satellite. Select any transponder that
you want to change the setting parameters or
to scan, by using “ ”, “ ” keys.
You can also select numerous transponders
simultaneously by pressing the “OK” key
consecutively.
1) EDIT : Press the “RED” key to change the
parameter values of the selected transponder.
Place the cursor on the sub menu by using
the “ ”, “ ” keys and Press the “ ”, “ ”
or “NUMERIC” button to change the setting.
2) ADD : If you cannot find the desired
transponder from the transponder list, you
can add it by inputting appropriate parameter
values for a new transponder. When you
want to change the parameter of an existing
transponder, select the parameter using the
“ ”,” ” keys and change its value by using
the “ ”, “ ” or “NUMERIC” keys.
3) SCAN : This option will enable you to search
all channels broadcasted over a specific
transponder using its predefined information.
Select the transponder from transponder list
which you want to search, by using the
“ ”,” ” keys. You can also select
numerous transponders simultaneously
by pressing the “OK” key consecutively,
then the selected transponders will be
highlighted. If you cannot find it from the
transponder list, you should insert all the
setting parameters.
4) DELETE : Press the “BLUE” key to delete
the selected transponders.
Main Menu
- 18 -