SAB Explorer User Manual - page 25
3.4 Clock settings
Daylight Saving Time : Select the “Daylight
saving time” “ON/OFF” mode by using the
“ ”, “ ” buttons.
Adjust Time Zone : You can set the Current
Time (Local area time) in this mode. To set
the Current Time, select the value using the
standardized information of current service
area by pressing the “ ”, “ ” keys.
On Timer : Sets up hour and minute of your
receiver Power on time. Enter a Power on
time by using numeric buttons(0~9).
On Timer Mode : Powers on receiver by
setting this option with “Once” or daily” by
pressing the “ ”, “ ” buttons.
3.5 Lock Settings
Select “Lock Settings” from the “Main Menu”,
and you will be requested to insert the
password. Default Password is “0000”.
System Lock : To lock the receiver, select
“System Lock” in the “Lock Settings”
menu and change it to the “ON” mode by
using “ ”, “ ” keys. If the receiver is locked
, whenever you try to start the STB, the
“Password” screen will appear and you will
be asked to enter your Password
Channel Manager Lock : To lock the
channel Manager, select “Channel Manager
Lock” in the “Lock Settings” menu and
change it to the “ON” mode by using the
“ ”, “ ” keys.
Main Menu
- 24 -