Sailor 6248 VHF User Manual - Vhf Channels
Chapter 2: Operation
12
VHF radio communication
6. Say: “Over.” and release the PTT button to allow the caller to confirm the
suggested new channel.
7. Switch to the new channel using the keypad or by turning the selector knob
to the agreed channel and begin your conversation. Press PTT only when
you are talking.
Making a radio telephone call on channel 16
To make a radio telephone call, proceed as follows:
1. Select channel 16.
2. Lift the Handset or take another speaker device.
3. Press the PTT button. The symbol TX shows that the VHF radio is
transmitting on the working channel displayed.
4. Say the name of the station you are calling three times.
5. Say: “This is [your ship’s name]”.
6. Say: “Over.” and release the PTT button to listen. The symbol RX shows
that the radio is receiving on the working channel displayed
7. When answered, agree upon a working channel other than 16.
8. Switch to the new channel by entering the channel number to the agreed
channel and begin your conversation.
VHF channels
You can change channels whenever the channel designator is displayed. Enter
the channel using the keypad or turn the selector knob to browse through all
channels that are available in the selected channel table. Only valid channel
numbers are accepted. When browsing channels they appear in the display in
the following order:
•
Primary channels
•
Weather channels (if any)
•
Private channels (if any)
www.busse-yachtshop.de | info@busse-yachtshop.de