Sailor 6248 VHF User Manual - Setup
Chapter 2: Operation
Setup
19
2222
Ope
ra
ti
o
n
Setup
The following setup pages are described in this section of the manual:
•
Radio setup
•
Channel setup
•
Power Supply
•
System setup
•
Controller setup
Accessing a setup page
To change a setting in one of the SETUP pages, do as follows
1. Press the soft key SETUP.
2. Press the arrow soft key
or
to advance to SETUP page you want to
edit.
3. Turn the selector knob to go to a setting, then press the selector knob to
change the setting.
4. Press EXIT to return to normal radio operation.
Radio setup
Para-
meter
Description
Scan Hang
Time
Scan hang time, in seconds on an active receiving working
channel. The time is measured from the signal is detected. The
radio remains on the channel for the set time interval, if a signal
was detected.
OFF: Resumes scanning when signal disappears (default)
4, 6, 8, 10: Hang time in seconds.
www.busse-yachtshop.de | info@busse-yachtshop.de