Sailor 6248 VHF User Manual - Channel Setup
Chapter 2: Operation
Setup
21
2222
Ope
ra
ti
o
n
Channel setup
Parameter
Description
Channel Mode
To select the channel table for the primary channel.
Channel tables available: INT, BI, US, CA, ALT. See also
VHF channel table on page 13.
Bandwidth
Selection of the bandwidth for the fixed pre-programmed
channels. This is recommended from Radio Regulations:
Wide: Wide band is 25kHz channel bandwidth (default)
Narrow: Narrow band defines a channel bandwidth of
12.5kHz
In narrow band mode the channel number is displayed as:
•
2xx if the new frequency is between the original
frequency in wideband mode
•
4xx if the new frequency is the same as the original
frequency in wideband mode
INT. Channels
You can view the channel
settings. Press the soft key
to advance the channel
numbers.
Bandwidth: WIDE (default) or
NARROW
Tagged for scan: OFF
(default) or ON
For customizing, contact your authorized dealer.
Press the soft key EXIT to return to CHANNEL SETUP.
BI. Channels
As described above.
US. Channels
As described above.
CA. Channels
As described above.
ALT. Channels
For customizing, contact your authorized dealer.
Private Channels For customizing, contact your authorized dealer.
EXIT
INT. Channels
10
PORT-PUBLIC
Ch: 1
Rx: 160.6500 MHz
Bandwidth:WIDE
Tagged for scan: OFF
Tx: 156.0500 MHz
www.busse-yachtshop.de | info@busse-yachtshop.de