Sailor 6248 VHF User Manual - Phone Book
Chapter 2: Operation
16
Phone book
To start scanning press the soft key SCAN. The
SCAN menu is shown. Press START to start
scanning. To leave the SCAN menu, but not
the scanning procedure, press EXIT.
To stop scanning press STOP, QUIT if not in
the SCAN menu, or press PTT on the speaking
device.
To tag a channel for scanning turn the
selector knob until the wanted channel is in
the display. Then press the soft key TAG. The
display shows the channel number and the
word TAG at the right side of the display.
To remove a channel from the scanning
sequence turn the selector knob until the
tagged channel is displayed. Then press the soft key TAG to remove the tag.
To see all tagged channels press the soft key FILTER and turn the selector
knob. Press the soft key EXIT to leave the FILTER function.
For details how to set up the scanning function see Radio setup on page 19.
Phone book
You can enter up to 200 contacts. A contact has the following details:
•
Name (up to 20 characters)
•
Type (SHIP, GROUP or COAST STATION)
•
Channel
The phone book is always sorted alphabetically by contact names. Use the soft
key FILTER to toggle between CONTACTS - ALL, COAST, SHIP or GROUP.
Note
The displayed working channel is temporarily included in the
scanning list (although no TAG icon is shown).
10
EXIT
START
TAG
INT
INTERSHIP/PORT
EXIT
STOP
TAG
INT
SCANNING[16]
10
FILTER
FILTER
www.busse-yachtshop.de | info@busse-yachtshop.de