Samlexpower PST-100S-12E Owner's Manual - Table 2.1: Notes
10 | SAMLEX AMERICA INC.
SAMLEX AMERICA INC. | 11
tABLe 2.1: inVeRteR SiZinG FActoR
type of Device or Appliance
inverter
Sizing Factor*
LaserPrinter/otherDevicesusingQuartzLampsforheating
4
SwitchModePowerSupplies(SMPS):noPowerfactorcorrection
3
PhotographicStrobe/flashLights
4(Note1)
*
Multiply the Running Active Power Rating {Watts} of the appliance by this Factor to arrive at
the Continuous Power Rating of the inverter for powering this appliance.
tABLe 2.1: noteS
1.forphotographicstrobe/flashunit,thesurgepoweroftheinvertershouldbe>4
times the Watt Sec rating of photographic strobe / flash unit.
seCtIOn 2 |
General Information
seCtIOn 3 |
limiting electro-Magnetic
Interference (eMI)
These inverters contain internal switching devices that generate conducted and radiated
electromagneticinterference(EMI).TheEMIisunintentionalandcannotbeentirely
eliminated.ThemagnitudeofEMIis,however,limitedbycircuitdesigntoacceptable
levelsasperlimitslaiddowninEuropeanStandardEN55022:ClassBandEN55024.
These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a residential environment. These inverters can
conductandradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordance
withtheinstructionmanual,maycauseharmfulinterferencetoradiocommunications.
TheeffectsofEMIwillalsodependuponanumberoffactorsexternaltotheinverter
likeproximityoftheinvertertotheEMIreceptors,typesandqualityofconnectingwires
andcablesetc.EMIduetofactorsexternaltotheinvertermaybereducedasfollows:
i
inFo
- Ensure that the inverter is firmly grounded to the ground system
of the building or the vehicle
- LocatetheinverterasfarawayfromtheEMIreceptorslikeradio,audio
and video devices as possible
- KeeptheDCsidecablesbetweenthebatteryandtheinverter
as short as possible.
- TwisttheDCsidecables.Thiswillpartiallycancelouttheradiatednoise
from the cables
- ShieldtheDCsidecableswithmetalsheathing/copperfoil/braiding:
-
Usecoaxialshieldedcableforallantennainputs(insteadof300ohmtwinleads)
-Usehighqualityshieldedcablestoattachaudioandvideodevicestooneanother
- Limitoperationofotherhighpowerloadswhenoperatingaudio/
video equipment