Smart-Azz GT28 User Manual - 1. General Instruction
3
1. GENERAL INSTRUCTION
1.1
PRECAUTIONS BEFORE INSTALLATION
1.
Prepare a SIM card for GSM communication.
2.
Use a mobile phone to confirm that a PIN code has
not
been set on the SIM card,
and that it can dial out and receive telephone calls and SMS messages without
problems.
3.
Before installing the SIM card, make sure to disconnect all power from the Tracker
unit.
1.2
INSTALLING BATTERY & SIM CARD
Due to the tight fit of the top and bottom part of the housing, the sequence is
recommended below:
Unscrew the 4 screws in the bottom plate. (In the middle of the bottom plate there are 2
lips on the sides that snap into the top plate.)
Hold the unit on its sides between the index finger and thumb, and squeeze the sides together
while separating the top and bottom halves of the unit with your finger nail. If done correctly, this
should not take a lot of pressure, and should come apart easily. Be sure to check how the small
USB cover should be reinstalled when closing the unit again.