Smart Technologies SMART Hub SE240 Administrator's Manual - page 18
12 |
CHAPTER 2
– CONFIGURING YOUR HUB
OR
Select the
Manually specify network settings and addresses
option to
configure networking settings manually, and then type the appropriate information
(as supplied by your network administrator) in the :
–
IP address
–
Subnet mask
–
Default gateway
–
DNS server 1
–
DNS server 2
4. Press
Apply All
.
TIP
You can reset your unit to ensure your settings are applied.
To configure e-mail
(SMTP) settings
1. Select
System > Settings.
The
Settings
dialog box appears.
2. If you have a SMART Hub SE240, select
Network and Conference
, and then
press
E-Mail (SMTP)
.
OR
If you have a SMART Hub VE220, select
Network
,
and then press
E-Mail (SMTP)
.
3. Type the name of your SMTP server in the
SMTP server name
box, and then type
the port number of your SMTP server in the
Port number
box.
NOTE
The SMTP’s default port number is 25.
4. Type the domain name of the SMTP server in the
Domain name
box.
NOTES
–
Select the
Enable file export by e-mail
check box to enable file
export by e-mail.
–
Select the
Enable RJ45 Ethernet port
check box to enable the
networking features on the
Administration
tab.
5. Press
Apply All
.