Smart Technologies SMART Hub SE240 Administrator's Manual - page 51
45 |
CHAPTER 4
– MAINTAINING YOUR SMART HUB
Upgrading Your SMART Hub VE220 Using a Product Key
File
IMPORTANT
This section applies to the SMART Hub VE220 only.
To upgrade your VE220
using a product key file
1. Connect a USB storage device to your computer’s USB interface.
2. Create a folder named
SMART
on the USB storage device.
3. Create a text file with the following text:
_PRODUCT_KEY =SE-XXXX-XXXX-XXXX-XXXX
Replace the XXXX section with your product key.
4. Save the file as
SMART_upgrade_keys.txt
in the
SMART
folder on the USB
storage device.
5. If you have an activation key, you can add it to the text file in this format:
_ACTIVATION _KEY = XXXXXXXXXXXXXXXXXXXXXX
NOTE
If you don’t have your activation key, contact the
and
they will send it to you. You must provide your product key and installation ID
in order to receive your activation key.
6. Disconnect the USB storage device from your computer and connect it to the
SMART Hub VE220’s USB interface.
7. Select
System > Settings
.
8. Select
Upgrade Hub to SE240
.
9. Press the
Get from File
button.
10. Press
Upgrade.
NOTES
–
You don’t have to type dashes when you enter your activation or product
key numbers.
–
Your Installation ID is unique to your SMART Hub VE220.