Smart Technologies SMART Hub SE240 Installation And User Manual - page 18
12 |
CHAPTER 3
– CONFIGURING YOUR HUB
Configuring Multiple SMART Hub SE240
Units
If you have more than one SMART Hub SE240, you can configure one unit, export the
configuration settings to a USB storage device, and then import the configuration
settings to the other units.
IMPORTANT
The export process doesn’t include orientation data on the USB storage device.
Exporting and Importing Configuration Settings
To export configuration
settings to a USB
storage device
1. Connect a USB storage device to your hub, and then select
System > Settings
.
The
SMART Hub SE240
Settings
dialog box appears.
IMPORTANT
If a password is required to change the configuration settings, enter it in the
text box located at the bottom of the window, and then press
OK
.
2. Select
Administration > Export Settings
.
A dialog box appears asking you to select the settings you want to export to a
USB drive.
3. Select the
SMART Hub SE240 system settings
check box to export
configuration settings, and the
E-mail Contacts
check box to export e-mail
contacts.
4. Press
OK
.
A second dialog box appears indicating that you’ve successfully exported all
selected settings files.
5. Press
OK
.