Smart Technologies SMART Hub SE240 Installation And User Manual - page 20
14 |
CHAPTER 3
– CONFIGURING YOUR HUB
NOTE
Only enter your old password if you have an existing one, or if you haven’t
already done so in the text box at the bottom of the main
Settings
dialog box.
4. Press
Apply All
.
Connecting Your Computer to Your Hub
You can connect your computer to your hub to view its input on your SMART product’s
display and do the following:
•
Write and draw in digital ink.
•
Freeze the display.
•
Take screen captures.
•
Use the on-screen keyboard and right-click features of your hub’s firmware.
To connect your computer
to your hub
Connect your computer to your hub using the appropriate VGA/DVI or DVI-D cables
and adapters.
The following diagram shows the location of your hub’s connectors.
To configure your hub
for the computer
1. Select
System > Settings
.
The
SMART Hub SE240
Settings
dialog box appears.
2. Press
Input Configuration
.
3. In the
Input device name
box, type a name for the computer.
4. In the
Input Type
list, select
Analog
or
Digital
.
Computer
SMART Product (A)
Video (B)
Audio (C)
1
USB B receptacle 1
DVI connector 1
Stereo mini connector 1
2
USB B receptacle 2
DVI connector 2
Stereo mini connector 2
1A 2A
1B
2B
1C
2C