Smart Technologies SMART Hub SE240 Installation And User Manual - page 42
36 |
CHAPTER 5
– MAINTAINING YOUR HUB
To update your firmware
through a USB
storage device
1. Connect the USB storage device to a computer with Internet access.
2. Go to
www.smarttech.com/SE240firmware
and download the latest version’s
application files to the location on the USB storage device:
\SMART\
3. Disconnect the USB storage device from your computer, and then connect it to
one of the USB A receptacles on your hub.
4. Select
System > Settings
.
The
SMART Hub SE240
Settings
dialog box appears.
5. Press
Administration
, and then press
Firmware Update
.
A dialog box appears.
6. Select the
Application
check box, and then press
OK
.
7. Press
Restart
.
NOTE
The initial reset after updating the firmware can take several minutes.
Maintaining Your Hub’s Hardware
Your hub’s hardware requries little maintenance. However, clean its fans at least once
per year using a vacuum cleaner or a can of compressed air to ensure its best
performance.
If your hub’s environment is unusually dusty, clean its fans more frequently.