Tait TB8100 Installation Manual - 1.4
6
Installation
TB8100 Installation Guide
© Tait Electronics Limited June 2005
1.3.4
Health, Safety and Electromagnetic Compatibility in Europe
In the European Community, radio and telecommunications equipment is
regulated by Directive 1999/5/EC, also known as the Radio and
Telecommunications Terminal Equipment (R&TTE) directive. The
requirements of this directive include protection of health and safety of users,
as well as electromagnetic compatibility.
Intended Purpose of
Product
This product is an FM radio transceiver. Its intended purpose is for radio
communication in Private Mobile Radio (PMR) services or Public Access
Mobile Radio (PAMR) services.
Important
This product can be programmed for frequencies or emis-
sions that may make its use illegal. A license must be
obtained before this product is used. All license require-
ments must be observed. Limitations may apply to trans-
mitter power, operating frequency, channel spacing, and
emission.
Declaration of
Conformity
Brief Declarations of Conformity appear
on page 27
. You can download
the formal Declaration of Conformity from
http://eudocs.taitworld.com/
.
You can also obtain a signed and dated paper copy of the Declaration of
Conformity from Tait Europe Ltd.
1.4
Environmental Conditions
1.4.1
Operating Temperature Range
The operating temperature range of the TB8100 BSS is –30°C to +60°C
(–22°F to + 140°F) ambient temperature. Ambient temperature is defined
as the temperature of the air at the intake to the cooling fans.
1.4.2
Humidity
The humidity should not exceed 95% relative humidity through the
specified operating temperature range.
1.4.3
Dust and Dirt
For uncontrolled environments, the level of airborne particulates must not
exceed 100 µg/m
3
.