Tait TM8200 mobiles User Manual - Led Indicators
18
Getting started
LED indicators
Audible tones
Note: If quiet or silent mode has been turned on, you
will not hear any audible tones.
Refer to page 26 for a description of other tones you may hear.
LED
Meaning
red
(transmit)
glowing: your radio is transmitting
flashing: your transmit timer is about to expire
green
(receive)
glowing: you are receiving
flashing: you have received a call
amber
(scanning or
network)
glowing: your radio is scanning a group of chan-
nels for activity (conventional mode) or network
service is available (MPT trunked mode)
flashing: your radio has detected activity on
a channel, and has halted on this channel
(conventional mode)
flashing fast: in trunked mode, there is no
network service available
Tone type
Meaning
two short beeps radio turned on: the radio is powered on
and ready to use
one short beep radio turned off: the radio is powered off
one short beep valid keypress: the action you have
attempted is permitted
one long, low-
pitched beep
invalid keypress: the action you have
attempted is not permitted
one long, low-
pitched beep
transmission inhibited: you have attempted
to transmit but for some reason transmis-
sion is not permitted at this time