Tait TM8200 mobiles User Manual - Radio Installation

34

Radio Installation

Radio Installation

Mounting the U-bracket

Screw the U-bracket in the chosen mounting position using 

the self-tapping screws provided. At least four screws must 

be installed. If the U-bracket is being mounted over a 

curved surface, bend the U-bracket tabs slightly.

Important: Check that the U-bracket is not distorted 

when the screws are tightened.

Control head handling precautions

Important: The control head contains devices which can 

be damaged by static discharges. Always install or 

remove the control head in a static-safe environment. 

Information on antistatic precautions can be found at the 

Electrostatic Discharge Association (ESD) website, 

www.esda.org.

Installing the control head on the radio body

The orientation of the U-bracket mounting determines 

which way up the control head is mounted on the radio 

2

1

2