Talaris ntegra 177-0800 User Manual - page 15
Manual is about: multi currency 1 1/2pkt desktop counter/sorter
of
66
Ntegra
Machine Overview
TP05413021 Interim
Page 7 of 56
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
2.4
Feed Gap Adjustment
The feed gap is nominally 0.1mm with the adjustment control at the centre
position. To reduce the feed gap, rotate the adjustment control anti-clockwise to
the minus range. To increase the feed gap, rotate the adjustment control
clockwise to the plus range.
Adjust the feed gap by a half setting, then re-check the feed.
Feed gap adjustment is required for the following reasons:
• The counting of new or mint condition notes.
• The counting thin or poor condition notes.
• The counting of average condition notes.