Talaris ntegra 177-0800 User Manual - page 26
Process Instructions
Ntegra
Page 18 of 56
TP05413021 Interim
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
If the stacker is emptied at less than a complete batch, a caution will be shown on
the display. Press either the centre navigation key, or the ENTER key to clear the
caution message.
Once the count is complete, and all notes are removed from the pockets, if an
Integral or external printer is fitted and enabled, pressing the PRINT key will
transmit the count data to the printer.
Any notes rejected are not included in the count. The number of notes rejected is
shown on the display. press the RIGHT navigation key to see the reason the
notes were rejected.
4.1.1
Piece Count with ADD Function
Select the ADD function.
Place the notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
The Ntegra will count the notes, and display the total.