Talaris ntegra 177-0800 User Manual - page 28
Process Instructions
Ntegra
Page 20 of 56
TP05413021 Interim
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Pressing 1 on the numeric keys will bring up the following display, with the pointer
position on the ‘YES’ button:
To clear the Grand Total press either the centre navigation key, or the ENTER
key.
Press the 2 key on the numeric keys will immediately clear the Grand Total.
Press the 3 key on the numeric keys to return to the count display.
4.2
Mixed Count
Select the currency being counted. Refer to “Currency” on page 13 for currency
selection.
Using the “UP” navigation key, set the Ntegra in the “Mixed” mode.
If required, press the BATCH key to enable the batch limit in quantity of notes. If
it is required to batch by value, press the BATCH key again. If a batch quantity, or
batch value, other than the default batch limit is required, enter the batch limit
using the numeric keys, followed by the ENTER key.
Select AUTO or MANUAL start mode.
Place the notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
Note:
If an Integral or external printer is fitted and enabled, pressing 1 on the numeric
keys will also transmit the Grand Total to the printer.