TANDBERG 880 MXP User Manual - Tandberg 880 Mxp
Questmark Ltd
- 1 -
Tel No: 0115 9467500
104 Derby Road, Long Eaton,
Fax No:0115 9467515
Notts, NG10 4LS
VC No:0115 9467502
Tandberg 880 MXP
User Guide
.
Turning the System on
• Ensure the power supply is plugged into the mains and the system is turned on. .
• If the system does not respond, make sure the system is switched on by using the On/Off switch located
at the rear of the system.
• After a few seconds you will see the ‘Main Menu’ on the screen
If the menu doesn’t appear, it can be brought onto the screen by simply pressing menu, located in the centre
of the direction keys. To remove the welcome menu press cancel. Pressing the selfview button will bring up
an image of yourself.
Standby Mode
• On the welcome screen going to the standby option gives you four options
1. Delay standby for 1 hour
2. Delay standby for 3 hours
3. Do Not Disturb
4. Standby
Now
By selecting one of these options, it will delay the standby message for the duration you have selected.
• If the system is left for a long period of time without any activity it will automatically go into standby mode.
• Any type of standby can be interupted by the lifting of the remote control.
• An incoming call will also ‘wake up’ the system.
Moving the Camera
• Select Move Camera on the Main Menu.
• Select Near End or Far End on the Sub Menu.
• Move Camera as directed by the arrows by pressing the arrow
button
.
• Zoom in or out by pressing the
button.