TANDBERG MXP User Manual - page 11
What’s in this guide?
Getting started
Making calls
Using the phone book
In-call features
Video conferencing
11
D1403405 USER GUIDE VIDEO ENDPOINTS MXP ENGLISH—SEPTEMBER 2009
Getting started
Controlling the camera
Most, but not all, of the TANDBERG
meeting room video systems have
cameras that can be controlled from the
remote control.
• The TANDBERG Centric 1000 MXP,
Compass, and Utility have fixed cameras
that cannot be moved. Focus can,
however, be adjusted manually.
• The TANDBERG Tactical MXP and Centric
1700 MXP both have a camera that
can be moved up and down. Focus is
adjusted manually even on these.
When you are in a point-to–point call
you may also be able to control the far
end camera, provided that the far end
system has a remotely controllable
camera—see the chapter
In-call
features
.
Controlling cameras at both ends
During a call you may control your
own camera at all times by means of
the Arrow keys as long as no menu is
shown on the screen.
When you are in a point-to–point call
you may also be able to control the far
end camera, provided that the far end
system has a remotely controllable
camera. This is explained in the chapter
Using camera control
What is Selfview?
The term Selfview means the outgoing
image. In a normal video call using the
main camera, this will be the image of
yourself. The Selfview button toggles
the images between Far End, Selfview
and Dual Video Stream (if applicable).
Using Selfview outside calls
Pressing the Selfview key will switch
between the near end video and a blank
screen (or a logo, if uploaded by your
administrator) on the main monitor.
Selfview and Point-to–point
In a point-to–point call, press the
Selfview
key once to switch from far
end video to near end video to see a full
screen picture of the outgoing video.
Press Selfview again to go back to
normal.
Point-to–point and dual stream
In a point-to–point call with a dual video
stream, the duo video is displayed in the
big picture. Press the Selfview button to
toggle to the near end picture, then the
far end picture, and finally back to the
second video stream.
Selfview and camera control
Playing around with the remote control helps you understand what’s happening
… and use the four Arrow keys
to move the camera to the left,
right, up and down.
Press the Cancel key to remove
the main menu from the screen, if
needed…
Selfview