TANDBERG MXP User Manual - page 30
What’s in this guide?
Getting started
Making calls
Using the phone book
In-call features
Video conferencing
30
D1403405 USER GUIDE VIDEO ENDPOINTS MXP ENGLISH—SEPTEMBER 2009
Making calls
Adding calls to a conference…
The MultiSite feature
Conference systems with the optional
built-in MultiSite can handle up to 4–6
video calls and up to 3 telephone calls
simultaneously, depending on the
system.
You may set up a video meeting with
many participants in advance and/
or you may add participants during a
conference. This is called to add another
call.
Observe that the ability to add another
call is an optional feature, which your
system may, or may not, be equipped
with.
Systems without this option will not
have the Add Another Call icon in the
menus.
The Multiway feature
However, your system may be equipped
with the MultiWay feature. This feature
allows you to set up conferences with
many participants from your video
system.
MultiWay enables systems with no
conference option installed to run
complex video conferences with many
participants.
The MultiWay feature requires the
presence of an external MCU (Multi
Conference Unit) and the TANDBERG
VCS (Video Communication Server).
The MCU will run the conference for
you, if your system does not support
conferencing.
Consult your system administrator to
clarify whether this feature exists in your
system, if needed.
Using phone book group entries
If you dislike the idea of having to look
up each and every party to call every
time you are about initiate a conference,
you may like to know that you may add
group entries to the phone book.
This is a handy feature whenever you
want to set up meetings with the same
group frequently.
More on this can be found in
Phone
book usage
.
About video conferences
Part 2: Adding calls to a conference
Assuming that you already are in a call, press the OK key to produce the main menu,
which now looks slightly different:
Select this icon
and press the OK
key to start adding
participants…
The one you are already in call with.
Enter new “number”
here.
Select this icon and press
the OK key to open the
phone book as usual.
Once you have entered the second party to call, select the green
Call
icon and press the OK key, just press the green Call key on
the remote control.
The Add Another Call icon.
Repeat this process for as long as necessary (until the
upper limit is reached for your system, of course).
You may also use the Add Another Call icon to specify
everyone to be called before you actually call them.