Teac HDR2500T User Manual - 2. Setup

User’s Manua

l 

7

2. Setup 

2.1 Connecting up your unit 

There are several ways to connect up your unit as following. If you have any problem with your 

setup or need help, contact your dealer. 

2.1.1 Connecting the antenna 

  Connect the antenna cable to ANT IN 1 connector on the rear panel. 

  If there are two twin tuners built-in to your unit, you must ensure that there is a connection 

to both LOOP OUT 1 and ANT IN 2 connector with a loop cable, otherwise some programs 

can’t be watched.   

  If you have another unit, connect it from LOOP OUT 2 connector.   

  If you want to receive analogue channels on your TV, connect the antenna cable from the 

TV to LOOP OUT 2 connector. 

2.1.2 Connecting to your TV set 

Between all the following connectors of the digital unit, we recommend you to use the HDMI 

connection to get best picture quality. If your TV does not have the matching connector, then 

use the next connection in the following order for better picture quality. 

1. To use HDMI connector 

Plug one end of the HDMI cable into HDMI socket on the unit, and plug the other end into the 

matching socket on your TV. 

Note: You do not have to make audio connection because HDMI connector can output 

stereo audio or Dolby digital audio.