Teac HDR2500T User Manual - 10. Software Upgrade
User’s Manual
30
9.4 Modify Password
The local password is required to view locked channel
(See
§
8.2 Lock Channel
), or access some menus,
such as Advance Set, Channel Edit, etc. The pass-
word is set to 0000 by default. You can change this
password if necessary.
Select Main Menu → System Set → Advance Set →
Modify Password and press OK key to enter.
1. Press number keys to input new password.
2. Press number keys to input new password again
for confirmation.
Note: In case you lost your password, please use the Master Unlock Code “8101”.
10. Software Upgrade
The unit has a stable and convenient software to use. However, once in a while a new software
may be released to improved the unit performance. You can upgrade software by USB port.
You have to check up the software information of your unit before downloading a new software,
and download the latest software with the same system identification. It is only allowed to
update with the software of which system identification is identical to that of yours. Other wise
you will fail in software update.
If you have a USB memory stick, you can update the software from it by performing the fol-
lowing steps:
1. Download a new software from the web site.
2. Copy the software file to your USB memory stick.
3. Turn on the unit.
4. Insert the USB storage device into the USB port on
the unit.
5. Select Main Menu → System Set → Advance
Set
6. Enter the password (default: 0000) → Software
Upgrade menu.
7. Press
keys to select the software and press
Red
key to upgrade. During software upgrade,
upgrade progress bar is displayed on screen.
8. After upgrade, a prompt pops up on screen and
the unit restarts automatically. After which the
software update process is complete.
Warning: Do not turn off the unit or unplug the USB device during software upgrade.