Teac HDR2500T User Manual - page 26

User’s Manua

l 

17

  Past Time: Display past time.

  Duration:  Press 

 keys to select a recording 

duration. The recording will end at the specified 

time.

Select “Pause” and press OK key to pause valid recording. 

Select “Resume” and press OK key to resume valid recording. 

Select “OK” and press OK key to save the setting. 

Select “Cancel” and press OK key to cancel the setting. 

5. Stop Recording                   

1. Press STOP key when recording, a prompt pops 

up on screen. 

2.  Select a recording and press OK key to stop. 

Note: If you playback program while recording, 

press STOP key to stop playback, and press STOP 

key again to stop recording. 

5.4 Schedule Recording 

You can set future programs to be recorded at a specific time, and the unit will start recording 

automatically. In addition, you can modify schedules and delete unwanted schedules. 

Note: If the unit is in standby mode, it will start recording at a specified time without 

displaying any picture or sound on the TV. When the recording ended, the unit will 

switch back to standby mode again. However, if you intercept by pressing any keys on 

the RCU or on the front panel, control will be override by user and unit will start dis-

playing picture and sound. It will not automatically switch back into standby mode. 

Select Main Menu → PVR → Schedule and press OK key to enter, or press TIMER RECORD 

key to enter directly in non-menu mode. 

1. Add Schedule                                                                                 

1. Press 

Green

 key to display add schedule window. 

2.  Set schedule parameters as follows: 

Schedule Type:

 Set schedule type to Rec 

with

  keys. The unit will record channel at the 

specific time automatically. 

Schedule Start Time:

 Press OK key to display 

calendar window. You can set a desired time ac-

cording to on-screen direction. The recording will 

be started at the specific time.