Teac HDR2500T User Manual - Safety Instruction
User’s Manua
l
V
Safety Instruction
Read following items carefully before operating this unit.
Installation
Place the unit on a firm and level surface.
The mains socket should be near the equipment. Do not run an extension lead to the unit.
Install the unit in a place with:
good ventilation (leave no less than 10cm around this unit)
no heat source (burning candle, radiator, heater, fireplace, amplifier, etc)
suitable temperature
against humidity (especially bathroom, kitchen, etc)
no direct sunlight
low vibration
Maintenance
To avoid the risk of fire or electric shock, don’t expose this unit to rain, splashing and don’t
put object with liquid on this unit.
Do not cover vents of this unit with newspaper, table cloth, curtain, etc.
Don’t put heavy objects on this unit.
Turn off this unit first, after 1 to 2 hours turn it on when move this unit from a cold envi-
ronment to a hot environment, vice versa.
To avoid the risk of lightning strike, unplug power cord of the unit from wall outlet in light-
ning storm.
Unplug power cord from wall outlet when the unit is not used for a long time or damaged
accidentally.
Unplug this unit from wall outlet before changing connections between this unit and other
related equipments.
Don’t unplug or insert signal, audio and video cables when this unit is turned on.
Unplug power cord of this unit from wall outlet before cleaning. To reduce damage, clean
this unit with dry cloth. Don’t use liquid, spray or other flowing objects into this unit.
Power
Do not insert or pull out the plug by the wire nor touch the plug with wet hands to avoid
electric shock or fire.
Do not excessively bend the plug and wire, and do not place heavy objects on them, which
could cause damage, electric shock or fire.
Do not use damaged power cord or plug. If power cord or plug is damaged, contact your
local operator for replacement to avoid risk of fire or electric shock.
RCU Batteries
Remove batteries if RCU not be used for a long time.
Replace batteries if there is no enough power and dispose battery waste properly for en-
vironmental protection.