Teac HDR2500T User Manual - 7. Channel Search

User’s Manual 

26 

7. Channel Search 

This will guide you through parameter settings to search channels. 

7.1 Advance Frequency Edit 

In general multiple television or radio broadcasts are transmitted though a single frequency, 

that is a frequency with multiple channels. In Mux Edit window, the unit preset dozens of fre-

quencies, so you can modify or delete them. In addition, you can add some new frequencies. 

Select Main Menu → Installation → Mux Edit and press OK key to enter. 

Note: Make sure you are familiar with the technical aspects of the channel frequency 

before you proceed to edit it.   

1. Add Frequency 

Press  Red  key to display Add Mux window, in which 

you can add a frequency by performing the following 

steps: 

1.  Press numeric keys to input new frequency values. 

2. Press

  keys to select proper bandwidth. 

3. Press OK or EXIT key to save and back to the 

previous menu. 

4.  The new frequency is shown on the end of list. 

2. Modify Frequency 

1. Press 

  keys to select a Mux. 

2. Press 

Yellow 

key to pop up modify Mux window. 

3. Press 

  or number keys to set proper values. 

4. Press 

OK

 or EXIT key to save the setting. 

3. Delete Frequency 

1. Press 

  keys to select a frequency. 

2. Press 

Blue

 key to delete it. 

7.2 Search Type 

1. Manual Search 

You may choose to only search for channels of a spe-

cific frequency because more than one channel are 

provided via each frequency. You can set parameters 

manually if you are familiar with relevant parameters 

and manual search channels in the menu. 

Select Main Menu → Installation → Manual Search 

and press OK key to enter. 

1.  Press numeric keys to input correct frequency. 

2. Press 

 keys to select 6M, 7M or 8M for 

bandwidth.