Accolade installer’s and owner’s guide for electric heater model 806 we trust that this guide gives sufficient details to enable the appliance to be installed and maintained satisfactorily. However, if further information is required, our valor technical helpline will be pleased to help. Please tele...
Installer’s and owner’s guide page 2 customer care all our heaters are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years of trouble free service. This guide aims to improve your understanding and appreciation of your new heater,...
Installer’s and owner’s guide page 3 figure 1. Appliance dimensions installation location this heater is intended for use in a fireplace opening generally conforming to british standard 1251 for a nominal 400mm (16 inch) or 450mm (18 inch) fireplace. It may also be located in other fireplace opening...
Installer’s and owner’s guide page 4 the heater must not be located under a fixed electrical socket, the socket must always be accessible in order to disconnect the heater from the electrical supply for maintenance or when replacing a lamp. • important! This appliance must be earthed. • this heater ...
Installer’s and owner’s guide page 5 figure 3. Figure 2. The heater body should be fixed in position before the front surround is finally fitted. Please study the illustrations carefully to avoid damage to the heater. Front removal four very strong magnets retain the front surround (two on the top r...
Installer’s and owner’s guide page 6 figure 5. Figure 4. Method b – wire fix the fixing kit includes a steel wire and eyebolt to attach the heater to the back of the fireplace opening. Mark the position for the eyebolt at the back of the fireplace opening equal to the centre line of the heater and a...
Installer’s and owner’s guide page 7 spacer frame see figure 6. Supplied with the heater is a 75mm spacer frame. This can be used in installations where there isn’t a fireplace opening or where there is no or insufficient space behind a fire surround. • mark the position of the fixing brackets on th...
Installer’s and owner’s guide page 8 figure 8. Fitting the front before fitting the front surround, make sure that the compact fluorescent lamp is fitted into the lamp holder and that the plastic shroud, (which is fitted over the lamp) is rotated to give the preferred colour effect locate the magnet...
Installer’s and owner’s guide page 9 maintaining your fire always disconnect the heater from the electricity supply by removing the 3 pin plug and allowing the heater to cool before undertaking maintenance or replacing lamps. Lamp replacement the lamp fitted to this heater is a long life type, but d...
Installer’s and owner’s guide page 10 valor technical helpline if you require any further assistance please call the valor technical helpline on 08706 061 065 to help us quickly help you, please try to have the following information available before you contact us. Your post code type of fire model ...
