Valor accolade 806 Installer's And Owner's Manual - Page 7
INSTALLER’S AND OWNER’S GUIDE
Page 7
Spacer Frame
See figure 6.
Supplied with the heater is a 75mm spacer frame. This can
be used in installations where there isn’t a fireplace opening
or where there is no or insufficient space behind a fire
surround.
• Mark the position of the fixing brackets on the spacer
frame.
• Drill pilot holes in the marked position. Take care not to
drill right through the spacer frame.
• Screw the brackets to the spacer frame.
• Place the spacer frame in the desired position against the
wall. Mark the fixing positions through the holes in the
brackets.
• Drill 3 holes in the wall and fit the rawlplugs.
• Screw the spacer to the wall.
•
Position the heater in front of the spacer
frame. Mark the position of four fixing holes as in
figure 7. Drill pilot holes in the spacer frame.
Screw the heater to the spacer frame as in figure 7.
Figure 6.
Figure 7.