Valor accolade 806 Installer's And Owner's Manual - Page 5
INSTALLER’S AND OWNER’S GUIDE
Page 5
Figure 3.
Figure 2.
The heater body should be fixed in position before the front surround is finally fitted.
Please study the illustrations carefully to avoid
damage to the heater.
Front Removal
Four very strong magnets retain the front
surround (Two on the top rail and one on each of
the vertical legs).
Carefully separate the front surround from the
heater. Keep the front surround in a safe place
when installing the fire.
Offer the heater body to the fireplace opening to
ensure that it will fit before continuing with the
installation.
Appliance Fixing
Method A – Screw Fix
There are two slots in the top flange (See figure 3).
Mark the fixing position through the slots.
Remove the heater. Drill a hole with a No.12 drill bit at
each marked position. Insert the wall plugs provided.
Reposition the heater body and screw through the slots
to provide a secure fixing.