Valor ITS-701W Owner's Manual - page 11
TFT MONITOR OPERATION
Open/Close TFT Monitor
Press the (
) button on the front panel or on the front zone remote control to open/close the
Monitor.
TFT Monitor Auto Open
If “TFT Auto Open” is “On”, when the unit is turned on, the monitor automatically opens to the
last viewing position, and closes automatically when the unit is turned off.
If “TFT Auto Open” is “Off”, when the unit is turned on, the monitor will not open automatically,
but will close automatically when the unit is turned off. You can press the (
) button on the
front panel or on the remote control to move the monitor into the desired viewing position.
If “TFT Auto Open” is “Manual”, when the unit is turned on or turned off, the monitor has no
Movement.
See “General setting” for details.
Monitor Tilt Angle Adjustment
The monitor angle can be adjusted for optimum viewing using one of the following methods:
Press the (
) or (
) buttons on the front panel to adjust the tilt angle of the screen one step
at a time.
Press and hold the (
) or (
) buttons to continuously adjust the tilt angle. Adjust the “Screen
Tilt” in the “Screen setting” to adjust the tilt of the screen to the desired degree.
Camera Mode
When the vehicle is placed in "Reverse", and an optional rear camera is connected to the unit,
the TFT monitor will automatically switch to the camera input source.
Image Setting
Video Output Format
The table below shows the video output format for each source.
Adjustable Parameters
While on RGB mode, the only parameter that can be adjusted is brightness (BRIGHT). To
access “SHARPNESS”, “COLOR”, “CONTRAST”, and “BRIGHTNESS” you must be on CVBS
Mode.
Parameter Adjustment Procedure
1. Enter Picture Quality Setting Mode:
Press the PIC button on the remote or press and hold the INFO button on the front panel of the
Unit.
2. Select Items to Set:
Press the (
) buttons on the remote or rotate the SMART DIAL button
clockwise/anticlockwise to select an item.
8
AUX IN
Instructions for Insert/Eject, Play/Pause, Stopping Playback, Track Selection, Fast
Forward/Fast Reverse, Scan, and Random Play are the same for DVD, CD and MP3 operation.
Please see the DVD Player Operation section for information about these topics.
The file naming formats listed below are compatible with this unit:
• ISO 9660 – file name: 12 characters, file extension: 3 characters
• ISO 9660 – file name: 31 characters, file extension: 3 characters
• Joliet – 64 characters
If the file or folder name does not conform to ISO 9660 file system standards, it may not be
displayed or played back correctly.
CD Player User Interface
1. Current source indicator, touch this area to access MAIN menu.
2. Disk title
3. Track title
4. Current time
5.
: Touch to play/pause
6.
: Touch to stop disc playback
7.
: Touch to turn to the previous page
8.
: Touch to turn to the next page
9.
: Touch to fast backward current track
10.
: Touch to fast forward current track
11.
: Touch to activate/deactivate Scan Mode,and you can press the (TITLE) button on the
Remote control to toggle the Scan function "ON" / "OFF".
12.
: Touch to activate/deactivate Repeat Single Mode
13.
: Touch to activate/deactivate Random Mode
14.
: Touch to display the numeric keypad on the screen, and then you can use the numeric
Keypad to access a track directly.
15.Current track and total number of tracks on disk
16.Elapsed playing time
17.Playback information
18.Volume indicator
CD/MP3/WMA/JPEG OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
27