Valor ITS-701W Owner's Manual - page 18
Standby
1. Touch the
button on the touch-screen to access Standby mode.
2. In the standby mode, the unit stands in low-power state with audio output only.
3. In the standby mode, you can return to normal screen mode by performing any unit operation.
The onlt exception is when you rotate "VOL” button on the front panel.
15
The menus are displayed in English only.
4. Press the (OK) button on the remote control or touch the item directly to confirm your
selection and begin playback.
Moving Through Chapters
Press the (
) button on the remote control to advance to the next chapter on the DVD.
Press the (
) button on the remote control to move to the previous chapter on the DVD.
Fast Forward/Fast Reverse
Press the (
) button on the remote control or touch the
of the area E on the screen
to fast forward. Keep pressing or touching and releasing the button to increase the rate from
“2X” to “4X”, “8X”, and “20X”.
Press the (
) button on the remote control or touch the
of the area E on the screen
to fast reverse. Keep pressing or touching and releasing the button to increase the rate from
“2X” to “4X”, “8X”, and “20X”.
GOTO Search
During DVD or VCD playback, perform the following steps to use the GOTO feature to access a
specific location on a disc:
1. Press the
button on remote control or touch the F Area on the screen to enter “GOTO”
mode.
2. Press the (
) buttons on the remote control to select a category.
• For DVD mode, you can choose Time or Title/ Chapter search.
• For VCD mode, press the
button to choose between Track Search, Disc Search and
Exit.
3. Touch the (
)/ (
) area on the screen to display a numeric keypad on the touch
screen.
4. Enter a time/Track number into the field using the numeric keypad on the remote control or on
the screen.
20