Valor ITS-701W Owner's Manual - page 14
Adjusting an Audio Feature
Press the (
) buttons on the remote or rotate the POWER OFF/VOL
clockwise/counterclockwise to adjust the selected feature to the desired setting.
NOTE: The Bass and Treble levels are only adjustable when EQ is set to “User” mode.
The Loudness function compensates for deficiencies in sound ranges at low levels. When the
Loud function is on, LOUD is displayed on the screen.
Exiting the Audio Control Menu
Press the escape arrow on the top right corner of the TFT display.
Press the (ESC) button on the remote control to exit the audio control menu.
System Reset
To correct a system halt or other unusual operation, use the tip of a pen to press the RESET
button located on the front bottom-right corner of the unit. After a system reset, the unit restores
the settings before the last power off.
Mute
The volume will be muted when the following cases occur:
• Automatic: When the “MUTE” wire is connected to a cell phone that will output a mute signal to
the “MUTE” wire.
• Manual: Press the MUTE button on the front panel or the MUTE button (
) on the remote to
Mute the volume from the unit.
NOTE: Press the MUTE button again to restore the volume.
Adjusting the volume or using any of the audio set-up features will cancel the mute function.
User
Flat
Jazz
Pop
Classic
Rock
News
Urban
Rave
Movie
Techno
BASS
TREBL
FADE
BAL
SW
LOUD
OFF and ON
11
In “DVD Setup” mode, “LANGUAGE”, “VIDEO”, and “RATING” (parental lock) are available for
setup. This operation can be performed using rotary encoder, the remote control or touch
Screen.
Accessing the DVD Setup Screen
If DVD is selected as the current playing source, you can access DVD setup screen through
following methods:
• Press the SMART DIAL on the front panel or touch the area A to access the MAIN menu, and
then touch the DVD TOOLS to access the DVD Setup Screen.
• Press the (MENU) button on the remote control, press the direction button to select DVD
TOOLS and press the (OK) button to access.
Accessing a Menu
To access a menu (LANGUAGE, VIDEO, RATING), press the direction buttons on the remote
control to highlight the desired menu. You can also touch the on-screen menu selection to
Access that menu.
NOTE: Once the DVD setup is complete, the settings are memorized. If you want To restore the
factory default settings, please adjust the “Load Factory “in the RATING Menu.(See RATING
Menu.)
Selecting a Feature for Adjustment
Once inside a menu, press the (
) on the remote control or touch the item directly to select
the feature to be adjusted.
Adjusting a Feature
1. Enter the option field for the feature you want to adjust by pressing the (OK) button on the
remote or by pressing SMART DIAL. A submenu appears in a second row with the selected
option.
2. Select a new value by pressing the (
) buttons on the remote control or rotate
clockwise or counterclockwise the SMART DIAL.
3. Confirm your selection by pressing the (OK) buttons on the remote control, or press the
SMART DAIL. The new setup is completed.
LANGUAGE Menu
If a DVD supports more than 1 Subtitle or Audio language, all the languages are available for
selection during playback. If the selected language is not supported by the DVD, then the
default language is used. During playback, press the (SUBT) or (AUDIO) button on the remote
control to change the language directly. This will not affect the DVD menu settings.
LANGUAGE Menu Features
DVD SETUP MENU
Select the default language which you would like
to listen to (if optional).
Select the default language which you would like
subtitles (if applicable) to display.
24