Valor ITS-701W Owner's Manual - page 19
Tuner TFT display
TUNER (FM/AM) OPERATION
1. Current Source information, touch this area to return to MAIN menu
2. Current Radio Band Indicator
3. Current Preset Station playing Indicator
4. Stereo Broadcasting Indicator
5. Radio Frequency Indicator
6. Preset Radio Stations: Touch to recall preset stations or touch and hold to store a
Station.(Total 12 stations per Band you can preset.)
7. System EQ setting
8. Loud Setting Indicator (7-8 items’ setting method, see “Audio control menu” for
instructions.)
9.Volume Indicator.
10.Strong Local Signal Broadcasting Indicator: Touch to activate/deactivate Local function
11.Current time Indicator
12.
: Touch to change among the following bands: FM-1, FM-2, FM-3, AM.
13.
: Touch to automatically scan and store stations in current radio band. You also can
Press the AS/PS button on the front panel.
14.
: Touch to seek down.
15.
: Touch to seek up.
16.
: Touch to tune down one step.
17.
: Touch to tune up one step.
18.
: Touch to activate/deactivate Scan Mode
Switch to Radio Tuner source
Press the MODE button on the front panel or SRC button on the remote control to switch to the
Tuner source.
Select FM/AM Band
Touch the BAND button on the screen, or press the BAND button ( ) on the remote
Control to change among the following bands: FM-1, FM-2, FM-3, AM.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
16
NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless
the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT
screen displays caution information with a blue background. Rear video screens, if applicable,
will operate normally.
Opening/Closing the TFT Video Screen
Opening the TFT Screen
To open the TFT video screen, press the (
) button on the unit or press the (
) button
on the remote control.
Closing the TFT Screen
Press the (
) button on the unit or press the (
) button on the remote control again to
close the TFT screen.
Insert/Eject Disc
Inserting a Disc
When inserting a DVD disc, DVD mode is entered and disc play begins.
NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit
code must be entered and/or the disc must be authorized (see “RATING (Parental Lock) Menu”).
You cannot insert a disc if there is already a disc in the unit or if the power is off.
NOTE: CD-R/RW, DVD-R/RW, DVD+R/RW will not play unless the recording session is closed.
Ejecting a Disc
Press the button
on the unit to eject the disc. The unit automatically reverts to Tuner mode
at the same time.
Reset the Loading Mechanism
If the disc loads abnormally or does not play properly, press and hold the button
on the
unit to reset the loading mechanism. The disc is ejected and normal operation resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted, press the MODE button on the front
panel or SRC button on the remote control till DVD appears at the top of the screen.
Using the Touch-Screen Controls
DVD PLAYER OPERATION
1
2
3
4
5
6
7
8
9
18