Valor ITS-701W Owner's Manual - page 17
Selecting a Feature for Adjustment
Press the direction buttons on the remote control or touch the option directly on the screen to
select the feature to be adjusted.
Adjusting a Feature
1. Enter the option field for the feature you want to adjust by pressing the (OK) button on the
remote or by pressing the SMART DIAL button. A submenu appears in a second row with the
selected option.
2. Select a new value by pressing the direction button.
3. Confirm your selection by pressing (OK) button or pressing the SMART DIAL button. The new
value setup is complete.
Adjusting the Clock
1. Access the “Clock” setting under the General Setup menu.
2. Press the direction button on the remote to move the cursor to the “Hour” or “Min” position,
and press the (OK) button. You also can touch the “Hour” or “Min” position directly.
3. The numeric keypad will pop up.
4. Press the numeric button on the remote control or touch the numeric keypad on the screen to
adjust the hour or minutes.
5. Press the (OK) button on the remote control or on the keypad of the screen to confirm setup.
Return to normal playback
The system will automatically return the previous playback mode you were in before accessing
the setup menu after 20 seconds of inactivity.
The output of Camera Image is in normal mode
The video output is switched automatically based
on the current disc.
The video output is in the standard NTSC format
The video output is in the standard PAL format
The TFT panel automatically opens when the unit
is turned on.
The monitor does not open or close when the unit
is turned on or turned off.
You must press the
button on the TFT panel or
the
button on the remote to open the TFT.
Manual
The output of Camera Image is in reverse mode
14
5. Press the OK button on the remote control or on the touch screen to go to the specified
location on the disc.
6. Press the
button on the remote control or touch the F Area on the screen again to exit.
Direct Chapter / Track Selection
During DVD, VCD and CD playback, you can use the numeric keypad on the remote control to
access a track directly.
Viewing an Alternate Picture Angle (DVD Only)
Some DVD contain scenes that have been shot simultaneously from different angles. For discs
recorded with multiple angles, press the (ANGLE) button on the remote control to toggle
available angles of the on-screen image.
Zooming
Press the ZOOM button on the remote control to enlarge and pan through the video image using
the following options: “Q1”, “Q2”, “Q3”, “Q4”, and “OFF”.
Multi-Language Discs (DVD Only)
Changing Audio Language
If you are watching a disc recorded in multiple languages, press the (AUDIO) button on the
remote control to choose a language. You also can touch the area E, and then touch the
button.
NOTE: During VCD playback, press the (AUDIO) button on the remote control to choose
between Left Channel, Right Channel, and Stereo.
Changing Subtitle Language
If you are watching a disc recorded in multiple languages with subtitles, press the (SUBT) button
on the remote control to choose the language in which you would like the subtitles to appear.
You also can touch the area E, and then touch the
button.
Playback Information
During DVD and VCD playback, press the (INFO) button on the remote control or press the
(DISP)button or touch the area B to display playback information on the screen, including the
media playing and current playback time.
DVD Playback Information
The following information is displayed at the top of the screen during DVD playback:
21